top of page

MLSS / (activated) sludge concentration (with screen and buttons)

OTD-MLSA

OTD-MLSA-004

MLSS / (Activated) sludge concentration

An easy to install small transducer (sensor) connected to a dataprocessor unit with a screen and buttons.
Small 90 x 100mm sensor for easy installation

Go to Shop
MLSS / (Activated) sludge concentration

Measurement

Small transducer for easy inline installation.

With superior resistance to (bio)fouling & precipitation

Independence/insensitive
Not sensitive to changes in fluid colour or fluid velocity
Not sensitive to solids form and structure


Easy mounting due to the compact sensor.

Hot-tap retractable possible (See other versions)

Standard maintenance interval longer compared to optical sensors


Factory calibrated

Installation

Requirements

1 sensor (both submitter and receiver) in direct contact with fluid.

Fluid volume of +/- 60mm depth needed for measurement (width max 20mm).


Mounting options

  • Inline mounting: flange, mounting adaptor, vertical or horizontal

  • Mounting in bassin possible

  • For usage with Hot-tap (retractible): see OTD-MLSB


Cables

Sensor to dataprocessor: 2m (Other lenghts on request)
Dataprocessor to plc/datalogger: long cables possibles


Order & More information

All product variations

CUSTOM
Custom solutions possible
OBO-IWAA-001
Dry Solids (%DS) measurement in Iron water / Iron sludge
OBO-MLSA-001
MLSS / (activated) sludge concentration (Chain mounting)
OTD-MLSA-004
MLSS / (Activated) sludge concentration
OTD-MLSB-00X
MLSS / (Activated) sludge concentration (hot-tap transducer)
OTD-SDWA-00X
TSS (Sludge concentration) in sludge: 0 - 10% solids
OTD-SDWB-00X
TSS in dewatering centrate (Inline mounting)
OTD-SDWC-00X
Polymer concentration in centrate
OTD-SDWD-00X
Dry Solids in Sludge Cake: 0 - 40% DS
OTD-SDXA-00X
TSS (Sludge concentration) in sludge: 0 - 10% solids (with Hot-tap sensor)
OTD-SDXC-00X
Polymer concentration in centrate (extended hot-tap transducer)
OTD-TSSA-001
TSS concentration: 0 - 100 mg/L
OTD-TSSA-002
TSS concentration: 0 - 500 mg/L
OTD-TSSA-003
TSS concentration: 0 - 1.000 mg/L
OTD-TSSA-004
TSS concentration: 0 - 10.000 mg/L
OTE-CUSC-00X
Custom solution possible
OTE-SEDA-001
Olpas Sediment Load sensor
OTE-TSSC-001
Sonde, TSS concentration: 0 - 2 g/L
OTE-TSSC-002
Sonde, TSS concentration: 0 - 4 g/L
OTE-TSSC-003
Sonde, TSS concentration: 0 - 6 g/L
OTU-IWAA-001
Dry Solids Measurement in Iron Slude / Iron Water (Inline)
OTU-MLSA-001
MLSS / (activated) sludge concentration (Inline) : 0 - 20 g/L
OTU-SDXA-001
Sludge Concentration (inline mounting, hot tap transducer)
OTU-SDXB-001
TSS in dewatering centrate (Inline mounting)
OTU-SDXC-001
Polymer concentration in centrate (extended hot-tap transducer without screen and butons)
OTU-SDXD-001
Sludge Cake Concentration (inline mounting, SS316 transducer)
OTU-TSSB-001
TSS concentration (Inline mounting)

Didn't find what you're looking for ? 
With our versatile OLPAS Technology, we can build a tailor made sensor optimised for your application. 

bottom of page